Pimoroni Automation HAT Mini

The Pimoroni Automation HAT Mini is perfect for home automation projects, giving your greenhouse intelligent sprinklers, for scheduling your fish feeding, or for controlling low-voltage lighting systems. The Automation HAT Mini is equipped with a relay, three buffered inputs three outputs, and three analog inputs, all of which are 24V-tolerant. Last but not least, the HAT has a beautiful 0.96" full-color IPS LCD to display the status of your systems.

Use the buffered inputs to sense the on/off state of your devices, or get more granularity with the analog inputs that measure the input voltage with 12-bit accuracy. The sinking outputs can sink a total of 500mA across the three channels. For higher-current loads, you can use the relay that can tolerate up to 2A at 24V, and take advantage of the normally-open or normally-closed sides to give the correct failover state.

A female header is added on the underside of the board with the correct pinout for the Pimoroni breakout range. This opens up a whole host of nifty possibilities!

**Features:**

* 0.96" color LCD (160x80)
* 1 x 24V @ 2A relay (NC and NO terminals)
* 3 x 12-bit ADC @ 0-24V (ADS1015) (±2% accuracy)
* 3 x 24V tolerant buffered inputs
* 3 x 24V tolerant sinking outputs
* 3.5mm screw terminals
* Pimoroni breakout-compatible pin header
* Mini HAT-format board
* Fully-assembled (no soldering required)
* Compatible with all 40-pin header Raspberry Pi models
* Dimensions: 65mm x 30mm x 16.8mm

**Documents:**

* [GitHub](https://github.com/pimoroni/automation-hat)